BNNGF - PLASTIC PORCELAIN (POWDER) NO 30
- MSDS: BNNGF
- Manufacturer: SAUEREISEN CEMENTS
- Product Name: PLASTIC PORCELAIN (POWDER) NO 30
- National Stock Number: 5970-00-951-7493
Product Identification
Product ID:PLASTIC PORCELAIN (POWDER) NO 30
MSDS Date:05/01/1990
FSC:5970
NIIN:00-951-7493
MSDS Number: BNNGF
Responsible Party
PITTSBURGH, PA 15238-2920
US
Emergency Phone: 412-963-0303;800-424-9300(CHEMTREC)
Info Phone: 412-963-0303
Cage: 80703
Contractor
Telephone: 412-963-0303
Cage: 80703
Ingredients
SILICA, CRYSTALLINE - QUARTZ; (SILICA)
CAS: 14808-60-7
RTECS: VV7330000
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) >4000 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:DUST MAY DEHYDRATE MUCOUS MEMBRANE -
REPEATED INHALATION OF RESPIRABLE FREE DUST MAY CAUSE INDUSTRIAL
BRONCHITIS OR DELAYED LUNG INJURY, (SILICOSIS). TOXICITY: LOW ACUTE
ORAL TOXICITY. INHAL - DUST MA Y BE VERY SLIGHTLY IRRITATING; NOT A
SERIOUS PROBLEM. MAY CAUSE CATHARSIS OR VOMITING.
Explanation of Carcinogenicity:CRYSTALLINE SILICA (QUARTZ): GROUP 2
(NTP), GROUP 2A (IARC).
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH IMMED WITH WATER OR PHYSIOLOGICAL SALINE FOR AT
LEAST 15 MINUTES. GET MED ATTN. SKIN: WASH CONTACT AREA THOROUGHLY
WITH SOAP & WATER. REMOVE CONTAMINATED CLOTHING. LAUNDER BEFORE
REUSE. IN HAL: REMOVE TO FRESH AIR AT ONCE. APPLYARTIFICIAL
RESPIRATION IF BREATHING HAS STOPPED. GET MED ATTN. INGEST: INDUCE
VOMITING IF LARGE AMOUNTS ARE INGESTED. GET MEDICAL ATTN.
Fire Fighting
Extinguishing Media:USE WATER. MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:SWEEP, SCOOP OR VACUUM DISCHARGED MATERIAL.
NIOSH/MSHA APPROVED RESPIRATORY PROTECTION SHOULD BE WORN AT ALL
TIMES AND SKIN CONTACT AVOIDED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINERS CLOSED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST RESPIRATORS IN
COMPLIANCE WITH OSHA STANDARD 1910.134.
Ventilation:NORMAL VENTILATION FOR GOOD WORKING CONDITIONS SHOULD BE
USED.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SAFETY SHOWER AND EYEWASH STATION SHOULD BE
WITHIN DIRECT ACCESS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:307F,153C
Spec Gravity:2.65
Solubility in Water:LESS THAN 20%
Appearance and Odor:WHITE, ODORLESS POWDER.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:AVOID DAMPNESS.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:MATERIAL COULD BE DISPOSED OF IN APPROVED
LANDFILL ACCORDING TO FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.